dmesg - E5-2696v3 GTX1070
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.10.0-514.16.1.vz7.30.15 (mockbuild@builder4.eng.sw.ru) (gcc version 4.8.5 20150623 (Red Hat 4.8.5-11) (GCC) ) #1 SMP Wed Jun 21 14:23:18 MSK 2017
Command line: BOOT_IMAGE=/vmlinuz-3.10.0-514.16.1.vz7.30.15 root=/dev/mapper/openvz-root ro vconsole.keymap=de-latin1 rd.lvm.lv=openvz/root quiet nouveau.modeset=0 rd.driver.blacklist=nouveau video=vesa:off LANG=en_US.UTF-8
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000005ab68fff] usable
BIOS-e820: [mem 0x000000005ab69000-0x000000005b8c6fff] reserved
BIOS-e820: [mem 0x000000005b8c7000-0x000000005bb4efff] usable
BIOS-e820: [mem 0x000000005bb4f000-0x000000005c74ffff] ACPI NVS
BIOS-e820: [mem 0x000000005c750000-0x000000005cf9dfff] reserved
BIOS-e820: [mem 0x000000005cf9e000-0x000000005cf9efff] usable
BIOS-e820: [mem 0x000000005cf9f000-0x000000005d024fff] reserved
BIOS-e820: [mem 0x000000005d025000-0x000000005d287fff] usable
BIOS-e820: [mem 0x000000005d288000-0x000000005dff8fff] reserved
BIOS-e820: [mem 0x000000005dff9000-0x000000005dffffff] usable
BIOS-e820: [mem 0x000000005e000000-0x000000005effffff] reserved
BIOS-e820: [mem 0x0000000060000000-0x000000006fffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000209fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.8 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./X99 Extreme4/3.1, BIOS P3.40 08/05/2016
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x20a0000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000080000000 mask 3FFF80000000 uncachable
1 base 000060000000 mask 3FFFE0000000 uncachable
2 base 010000000000 mask 3FC000000000 uncachable
3 base 00005F000000 mask 3FFFFF000000 uncachable
4 base 0000E0000000 mask 3FFFF0000000 write-through
5 base 0000F0000000 mask 3FFFFE000000 write-through
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0x5e000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd550-0x000fd55f] mapped at [ffff8800000fd550]
iBFT found at 0xcf630.
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
BRK [0x01fcf000, 0x01fcffff] PGTABLE
BRK [0x01fd0000, 0x01fd0fff] PGTABLE
BRK [0x01fd1000, 0x01fd1fff] PGTABLE
BRK [0x01fd2000, 0x01fd2fff] PGTABLE
BRK [0x01fd3000, 0x01fd3fff] PGTABLE
BRK [0x01fd4000, 0x01fd4fff] PGTABLE
RAMDISK: [mem 0x3453f000-0x36297fff]
ACPI: RSDP 00000000000f0580 00024 (v02 ALASKA)
ACPI: XSDT 000000005bf73098 000AC (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 000000005bf9d310 0010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 000000005bf731d8 2A132 (v02 ALASKA A M I 01072009 INTL 20091013)
ACPI: FACS 000000005c74ef80 00040
ACPI: APIC 000000005bf9d420 00250 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 000000005bf9d670 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 000000005bf9d6b8 0009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 000000005bf9d758 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: SSDT 000000005bf9d798 0036D (v01 SataRe SataTabl 00001000 INTL 20120913)
ACPI: UEFI 000000005bf9db08 00042 (v01 ALASKA A M I 01072009 00000000)
ACPI: BDAT 000000005bf9db50 00030 (v01 ALASKA A M I 00000000 INTL 20091013)
ACPI: HPET 000000005bf9db80 00038 (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: MSCT 000000005bf9dbb8 00090 (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: SLIT 000000005bf9dc48 0002D (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: SRAT 000000005bf9dc78 01158 (v03 ALASKA A M I 00000001 INTL 20091013)
ACPI: WDDT 000000005bf9edd0 00040 (v01 ALASKA A M I 00000000 INTL 20091013)
ACPI: SSDT 000000005bf9ee10 15D7A (v02 ALASKA PmMgt 00000001 INTL 20120913)
ACPI: AAFT 000000005bfb4b90 002EF (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
ACPI: DMAR 000000005bfb4e80 000DC (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: ASF! 000000005bfb4f60 000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x04 -> Node 0
SRAT: PXM 0 -> APIC 0x06 -> Node 0
SRAT: PXM 0 -> APIC 0x08 -> Node 0
SRAT: PXM 0 -> APIC 0x10 -> Node 0
SRAT: PXM 0 -> APIC 0x12 -> Node 0
SRAT: PXM 0 -> APIC 0x14 -> Node 0
SRAT: PXM 0 -> APIC 0x16 -> Node 0
SRAT: PXM 0 -> APIC 0x20 -> Node 0
SRAT: PXM 0 -> APIC 0x22 -> Node 0
SRAT: PXM 0 -> APIC 0x24 -> Node 0
SRAT: PXM 0 -> APIC 0x26 -> Node 0
SRAT: PXM 0 -> APIC 0x28 -> Node 0
SRAT: PXM 0 -> APIC 0x30 -> Node 0
SRAT: PXM 0 -> APIC 0x32 -> Node 0
SRAT: PXM 0 -> APIC 0x34 -> Node 0
SRAT: PXM 0 -> APIC 0x36 -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: PXM 0 -> APIC 0x05 -> Node 0
SRAT: PXM 0 -> APIC 0x07 -> Node 0
SRAT: PXM 0 -> APIC 0x09 -> Node 0
SRAT: PXM 0 -> APIC 0x11 -> Node 0
SRAT: PXM 0 -> APIC 0x13 -> Node 0
SRAT: PXM 0 -> APIC 0x15 -> Node 0
SRAT: PXM 0 -> APIC 0x17 -> Node 0
SRAT: PXM 0 -> APIC 0x21 -> Node 0
SRAT: PXM 0 -> APIC 0x23 -> Node 0
SRAT: PXM 0 -> APIC 0x25 -> Node 0
SRAT: PXM 0 -> APIC 0x27 -> Node 0
SRAT: PXM 0 -> APIC 0x29 -> Node 0
SRAT: PXM 0 -> APIC 0x31 -> Node 0
SRAT: PXM 0 -> APIC 0x33 -> Node 0
SRAT: PXM 0 -> APIC 0x35 -> Node 0
SRAT: PXM 0 -> APIC 0x37 -> Node 0
SRAT: Node 0 PXM 0 [mem 0x00000000-0x5fffffff]
SRAT: Node 0 PXM 0 [mem 0x100000000-0x209fffffff]
NUMA: Initialized distance table, cnt=1
NUMA: Node 0 [mem 0x00000000-0x5fffffff] + [mem 0x100000000-0x209fffffff] -> [mem 0x00000000-0x209fffffff]
Initmem setup node 0 [mem 0x00000000-0x209fffffff]
NODE_DATA [mem 0x209ffd2000-0x209fff8fff]
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x209fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009dfff]
node 0: [mem 0x00100000-0x5ab68fff]
node 0: [mem 0x5b8c7000-0x5bb4efff]
node 0: [mem 0x5cf9e000-0x5cf9efff]
node 0: [mem 0x5d025000-0x5d287fff]
node 0: [mem 0x5dff9000-0x5dffffff]
node 0: [mem 0x100000000-0x209fffffff]
On node 0 totalpages: 33533945
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 5762 pages used for memmap
DMA32 zone: 368732 pages, LIFO batch:31
Normal zone: 518144 pages used for memmap
Normal zone: 33161216 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] enabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x16] enabled)
ACPI: LAPIC (acpi_id[0x20] lapic_id[0x20] enabled)
ACPI: LAPIC (acpi_id[0x22] lapic_id[0x22] enabled)
ACPI: LAPIC (acpi_id[0x24] lapic_id[0x24] enabled)
ACPI: LAPIC (acpi_id[0x26] lapic_id[0x26] enabled)
ACPI: LAPIC (acpi_id[0x28] lapic_id[0x28] enabled)
ACPI: LAPIC (acpi_id[0x30] lapic_id[0x30] enabled)
ACPI: LAPIC (acpi_id[0x32] lapic_id[0x32] enabled)
ACPI: LAPIC (acpi_id[0x34] lapic_id[0x34] enabled)
ACPI: LAPIC (acpi_id[0x36] lapic_id[0x36] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] enabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x15] enabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x17] enabled)
ACPI: LAPIC (acpi_id[0x21] lapic_id[0x21] enabled)
ACPI: LAPIC (acpi_id[0x23] lapic_id[0x23] enabled)
ACPI: LAPIC (acpi_id[0x25] lapic_id[0x25] enabled)
ACPI: LAPIC (acpi_id[0x27] lapic_id[0x27] enabled)
ACPI: LAPIC (acpi_id[0x29] lapic_id[0x29] enabled)
ACPI: LAPIC (acpi_id[0x31] lapic_id[0x31] enabled)
ACPI: LAPIC (acpi_id[0x33] lapic_id[0x33] enabled)
ACPI: LAPIC (acpi_id[0x35] lapic_id[0x35] enabled)
ACPI: LAPIC (acpi_id[0x37] lapic_id[0x37] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x20] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x22] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x24] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x26] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x28] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x30] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x32] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x34] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x36] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x21] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x23] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x25] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x27] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x29] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x31] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x33] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x35] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x37] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x02] address[0xfec01000] gsi_base[24])
IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 36 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x5ab69000-0x5b8c6fff]
PM: Registered nosave memory: [mem 0x5bb4f000-0x5c74ffff]
PM: Registered nosave memory: [mem 0x5c750000-0x5cf9dfff]
PM: Registered nosave memory: [mem 0x5cf9f000-0x5d024fff]
PM: Registered nosave memory: [mem 0x5d288000-0x5dff8fff]
PM: Registered nosave memory: [mem 0x5e000000-0x5effffff]
PM: Registered nosave memory: [mem 0x5f000000-0x5fffffff]
PM: Registered nosave memory: [mem 0x60000000-0x6fffffff]
PM: Registered nosave memory: [mem 0x70000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x70000000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:5120 nr_cpumask_bits:36 nr_cpu_ids:36 nr_node_ids:1
PERCPU: Embedded 44 pages/cpu @ffff88201ec00000 s140248 r8192 d31784 u262144
pcpu-alloc: s140248 r8192 d31784 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31
pcpu-alloc: [0] 32 33 34 35 -- -- -- --
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 33009954
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-3.10.0-514.16.1.vz7.30.15 root=/dev/mapper/openvz-root ro vconsole.keymap=de-latin1 rd.lvm.lv=openvz/root quiet nouveau.modeset=0 rd.driver.blacklist=nouveau video=vesa:off LANG=en_US.UTF-8
PID hash table entries: 4096 (order: 3, 32768 bytes)
x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
Memory: 3476152k/136839168k available (6743k kernel code, 2703388k absent, 2216392k reserved, 4416k data, 1712k init)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=36, Nodes=1
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=5120 to nr_cpu_ids=36.
NR_IRQS:327936 nr_irqs:1120 0
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 536870912 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2395.650 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4791.30 BogoMIPS (lpj=2395650)
pid_max: default: 36864 minimum: 301
Dentry cache hash table entries: 16777216 (order: 15, 134217728 bytes)
Inode-cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Mount-cache hash table entries: 4096
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
Initializing cgroup subsys ve
Initializing cgroup subsys beancounter
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 22 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
tlb_flushall_shift: 6
Freeing SMP alternatives: 28k freed
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 25371 entries in 100 pages
smpboot: APIC(0) Converting physical 0 to logical package 0
smpboot: Max logical packages: 2
DMAR: Host address width 46
DMAR: DRHD base: 0x000000fbffd000 flags: 0x0
DMAR: dmar0: reg_base_addr fbffd000 ver 1:0 cap d2008c10ef0466 ecap f0205b
DMAR: DRHD base: 0x000000fbffc000 flags: 0x1
DMAR: dmar1: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020df
DMAR: RMRR base: 0x0000005ce1e000 end: 0x0000005ce2dfff
DMAR: ATSR flags: 0x0
DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0
DMAR-IR: IOAPIC id 1 under DRHD base 0xfbffc000 IOMMU 1
DMAR-IR: IOAPIC id 2 under DRHD base 0xfbffc000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfbffc000
DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
DMAR-IR: Enabled IRQ remapping in xapic mode
IRQ remapping doesn't support X2APIC mode, disable x2apic.
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2696 v3 @ 2.30GHz (fam: 06, model: 3f, stepping: 02)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21 #22 #23 #24 #25 #26 #27 #28 #29 #30 #31 #32 #33 #34 #35 OK
Brought up 36 CPUs
smpboot: Total of 36 processors activated (172486.80 BogoMIPS)
node 0 initialised, 32110809 pages in 616ms
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x5bb4f000-0x5c74ffff] (12587008 bytes)
atomic64 test passed for x86-64 platform with CX8 and with SSE
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x60000000-0x6fffffff] (base 0x60000000)
PCI: MMCONFIG at [mem 0x60000000-0x6fffffff] reserved in E820
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:03: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:0b.0: [8086:2f81] type 00 class 0x088000
pci 0000:ff:0b.1: [8086:2f36] type 00 class 0x110100
pci 0000:ff:0b.2: [8086:2f37] type 00 class 0x110100
pci 0000:ff:0c.0: [8086:2fe0] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:2fe1] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:2fe2] type 00 class 0x088000
pci 0000:ff:0c.3: [8086:2fe3] type 00 class 0x088000
pci 0000:ff:0c.4: [8086:2fe4] type 00 class 0x088000
pci 0000:ff:0c.5: [8086:2fe5] type 00 class 0x088000
pci 0000:ff:0c.6: [8086:2fe6] type 00 class 0x088000
pci 0000:ff:0c.7: [8086:2fe7] type 00 class 0x088000
pci 0000:ff:0d.0: [8086:2fe8] type 00 class 0x088000
pci 0000:ff:0d.1: [8086:2fe9] type 00 class 0x088000
pci 0000:ff:0d.2: [8086:2fea] type 00 class 0x088000
pci 0000:ff:0d.3: [8086:2feb] type 00 class 0x088000
pci 0000:ff:0d.4: [8086:2fec] type 00 class 0x088000
pci 0000:ff:0d.5: [8086:2fed] type 00 class 0x088000
pci 0000:ff:0d.6: [8086:2fee] type 00 class 0x088000
pci 0000:ff:0d.7: [8086:2fef] type 00 class 0x088000
pci 0000:ff:0e.0: [8086:2ff0] type 00 class 0x088000
pci 0000:ff:0e.1: [8086:2ff1] type 00 class 0x088000
pci 0000:ff:0f.0: [8086:2ff8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:2ff9] type 00 class 0x088000
pci 0000:ff:0f.2: [8086:2ffa] type 00 class 0x088000
pci 0000:ff:0f.3: [8086:2ffb] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:2ffc] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:2ffd] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:2ffe] type 00 class 0x088000
pci 0000:ff:10.0: [8086:2f1d] type 00 class 0x088000
pci 0000:ff:10.1: [8086:2f34] type 00 class 0x110100
pci 0000:ff:10.5: [8086:2f1e] type 00 class 0x088000
pci 0000:ff:10.6: [8086:2f7d] type 00 class 0x110100
pci 0000:ff:10.7: [8086:2f1f] type 00 class 0x088000
pci 0000:ff:12.0: [8086:2fa0] type 00 class 0x088000
pci 0000:ff:12.1: [8086:2f30] type 00 class 0x110100
pci 0000:ff:12.4: [8086:2f60] type 00 class 0x088000
pci 0000:ff:12.5: [8086:2f38] type 00 class 0x110100
pci 0000:ff:13.0: [8086:2fa8] type 00 class 0x088000
pci 0000:ff:13.1: [8086:2f71] type 00 class 0x088000
pci 0000:ff:13.2: [8086:2faa] type 00 class 0x088000
pci 0000:ff:13.3: [8086:2fab] type 00 class 0x088000
pci 0000:ff:13.6: [8086:2fae] type 00 class 0x088000
pci 0000:ff:13.7: [8086:2faf] type 00 class 0x088000
pci 0000:ff:14.0: [8086:2fb0] type 00 class 0x088000
pci 0000:ff:14.1: [8086:2fb1] type 00 class 0x088000
pci 0000:ff:14.2: [8086:2fb2] type 00 class 0x088000
pci 0000:ff:14.3: [8086:2fb3] type 00 class 0x088000
pci 0000:ff:14.4: [8086:2fbc] type 00 class 0x088000
pci 0000:ff:14.5: [8086:2fbd] type 00 class 0x088000
pci 0000:ff:14.6: [8086:2fbe] type 00 class 0x088000
pci 0000:ff:14.7: [8086:2fbf] type 00 class 0x088000
pci 0000:ff:16.0: [8086:2f68] type 00 class 0x088000
pci 0000:ff:16.1: [8086:2f79] type 00 class 0x088000
pci 0000:ff:16.2: [8086:2f6a] type 00 class 0x088000
pci 0000:ff:16.3: [8086:2f6b] type 00 class 0x088000
pci 0000:ff:16.6: [8086:2f6e] type 00 class 0x088000
pci 0000:ff:16.7: [8086:2f6f] type 00 class 0x088000
pci 0000:ff:17.0: [8086:2fd0] type 00 class 0x088000
pci 0000:ff:17.1: [8086:2fd1] type 00 class 0x088000
pci 0000:ff:17.2: [8086:2fd2] type 00 class 0x088000
pci 0000:ff:17.3: [8086:2fd3] type 00 class 0x088000
pci 0000:ff:17.4: [8086:2fb8] type 00 class 0x088000
pci 0000:ff:17.5: [8086:2fb9] type 00 class 0x088000
pci 0000:ff:17.6: [8086:2fba] type 00 class 0x088000
pci 0000:ff:17.7: [8086:2fbb] type 00 class 0x088000
pci 0000:ff:1e.0: [8086:2f98] type 00 class 0x088000
pci 0000:ff:1e.1: [8086:2f99] type 00 class 0x088000
pci 0000:ff:1e.2: [8086:2f9a] type 00 class 0x088000
pci 0000:ff:1e.3: [8086:2fc0] type 00 class 0x088000
pci 0000:ff:1e.3: [Firmware Bug]: reg 0x10: invalid BAR (can't size)
pci 0000:ff:1e.4: [8086:2f9c] type 00 class 0x088000
pci 0000:ff:1f.0: [8086:2f88] type 00 class 0x088000
pci 0000:ff:1f.2: [8086:2f8a] type 00 class 0x088000
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x1000-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x70000000-0xfbffbfff window]
pci 0000:00:00.0: [8086:2f00] type 00 class 0x060000
pci 0000:00:01.0: [8086:2f02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:2f04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:2f08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [8086:2f28] type 00 class 0x088000
pci 0000:00:05.1: [8086:2f29] type 00 class 0x088000
pci 0000:00:05.2: [8086:2f2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:2f2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xfb83e000-0xfb83efff]
pci 0000:00:11.0: [8086:8d7c] type 00 class 0xff0000
pci 0000:00:11.4: [8086:8d62] type 00 class 0x010601
pci 0000:00:11.4: reg 0x10: [io 0xf130-0xf137]
pci 0000:00:11.4: reg 0x14: [io 0xf120-0xf123]
pci 0000:00:11.4: reg 0x18: [io 0xf110-0xf117]
pci 0000:00:11.4: reg 0x1c: [io 0xf100-0xf103]
pci 0000:00:11.4: reg 0x20: [io 0xf040-0xf05f]
pci 0000:00:11.4: reg 0x24: [mem 0xfb83d000-0xfb83d7ff]
pci 0000:00:11.4: PME# supported from D3hot
pci 0000:00:14.0: [8086:8d31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xfb820000-0xfb82ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfb83c000-0xfb83c00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:15a1] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xfb800000-0xfb81ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xfb839000-0xfb839fff]
pci 0000:00:19.0: reg 0x18: [io 0xf020-0xf03f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:8d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfb838000-0xfb8383ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:8d20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfb830000-0xfb833fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:8d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:8d14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfb837000-0xfb8373ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8d47] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8d02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfb836000-0xfb8367ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfb835000-0xfb8350ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x0580-0x059f]
acpiphp: Slot [2] registered
pci 0000:01:00.0: [1b21:1242] type 00 class 0x0c0330
pci 0000:01:00.0: reg 0x10: [mem 0xfb700000-0xfb707fff 64bit]
pci 0000:01:00.0: PME# supported from D3hot D3cold
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [mem 0xfb700000-0xfb7fffff]
pci 0000:02:00.0: [1aed:2100] type 01 class 0x060400
pci 0000:02:00.0: reg 0x10: [mem 0xfb500000-0xfb51ffff]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PCI bridge to [bus 02-06]
pci 0000:00:02.0: bridge window [mem 0xfb100000-0xfb5fffff]
pci 0000:03:04.0: [1aed:2100] type 01 class 0x060400
pci 0000:03:04.0: Max Payload Size set to 256 (was 128, max 2048)
pci 0000:03:04.0: PME# supported from D0 D3hot D3cold
pci 0000:03:05.0: [1aed:2100] type 01 class 0x060400
pci 0000:03:05.0: PME# supported from D0 D3hot D3cold
pci 0000:03:06.0: [1aed:2100] type 01 class 0x060400
pci 0000:03:06.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PCI bridge to [bus 03-06]
pci 0000:02:00.0: bridge window [mem 0xfb100000-0xfb4fffff]
pci 0000:03:04.0: PCI bridge to [bus 04]
pci 0000:05:00.0: [1aed:2001] type 00 class 0x018000
pci 0000:05:00.0: reg 0x20: [mem 0xfb420000-0xfb421fff]
pci 0000:05:00.0: reg 0x24: [mem 0xfb400000-0xfb41ffff]
pci 0000:05:00.0: reg 0x30: [mem 0xfb300000-0xfb3fffff pref]
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot
pci 0000:03:05.0: PCI bridge to [bus 05]
pci 0000:03:05.0: bridge window [mem 0xfb300000-0xfb4fffff]
pci 0000:06:00.0: [1aed:2001] type 00 class 0x018000
pci 0000:06:00.0: reg 0x20: [mem 0xfb220000-0xfb221fff]
pci 0000:06:00.0: reg 0x24: [mem 0xfb200000-0xfb21ffff]
pci 0000:06:00.0: reg 0x30: [mem 0xfb100000-0xfb1fffff pref]
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot
pci 0000:03:06.0: PCI bridge to [bus 06]
pci 0000:03:06.0: bridge window [mem 0xfb100000-0xfb2fffff]
pci 0000:07:00.0: [10de:1b81] type 00 class 0x030000
pci 0000:07:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
pci 0000:07:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:07:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:07:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:07:00.0: reg 0x30: [mem 0xfb000000-0xfb07ffff pref]
pci 0000:07:00.1: [10de:10f0] type 00 class 0x040300
pci 0000:07:00.1: reg 0x10: [mem 0xfb080000-0xfb083fff]
pci 0000:00:03.0: PCI bridge to [bus 07]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:03.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 08]
pci 0000:09:00.0: [8086:107d] type 00 class 0x020000
pci 0000:09:00.0: reg 0x10: [mem 0xfb640000-0xfb65ffff]
pci 0000:09:00.0: reg 0x14: [mem 0xfb620000-0xfb63ffff]
pci 0000:09:00.0: reg 0x18: [io 0xd000-0xd01f]
pci 0000:09:00.0: reg 0x30: [mem 0xfb600000-0xfb61ffff pref]
pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 09]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xfb600000-0xfb6fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: Enabled 1 GPEs in block 00 to 3F
vgaarb: device added: PCI:0000:07:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:07:00.0
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0x5ab69000-0x5bffffff]
e820: reserve RAM buffer [mem 0x5bb4f000-0x5bffffff]
e820: reserve RAM buffer [mem 0x5cf9f000-0x5fffffff]
e820: reserve RAM buffer [mem 0x5d288000-0x5fffffff]
e820: reserve RAM buffer [mem 0x5e000000-0x5fffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:01: [io 0x0500-0x057f] has been reserved
system 00:01: [io 0x0400-0x047f] could not be reserved
system 00:01: [io 0x0580-0x059f] has been reserved
system 00:01: [io 0x0600-0x061f] has been reserved
system 00:01: [io 0x0880-0x0883] has been reserved
system 00:01: [io 0x0800-0x081f] has been reserved
system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved
system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved
system 00:01: [mem 0xff000000-0xffffffff] has been reserved
system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved
system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved
system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0280-0x028f] has been reserved
system 00:02: [io 0x0290-0x029f] has been reserved
system 00:02: [io 0x02a0-0x02af] has been reserved
system 00:02: [io 0x02b0-0x02bf] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 3 devices
ACPI: bus type PNP unregistered
pci 0000:03:05.0: bridge window [io 0x1000-0x0fff] to [bus 05] add_size 1000
pci 0000:03:05.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000 add_align 100000
pci 0000:03:05.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:02:00.0: bridge window [io 0x1000-0x0fff] to [bus 03-06] add_size 1000
pci 0000:03:05.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:03:05.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:02:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-06] add_size 200000 add_align 100000
pci 0000:02:00.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:02.0: bridge window [io 0x1000-0x0fff] to [bus 02-06] add_size 1000
pci 0000:02:00.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:02:00.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-06] add_size 200000 add_align 100000
pci 0000:00:02.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:02.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:02.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:02.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:02.0: BAR 15: assigned [mem 0x70000000-0x701fffff 64bit pref]
pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [mem 0xfb700000-0xfb7fffff]
pci 0000:02:00.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:02:00.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:02:00.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:02:00.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:02:00.0: BAR 15: assigned [mem 0x70000000-0x701fffff 64bit pref]
pci 0000:02:00.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:03:05.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:03:05.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:03:05.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:03:05.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:03:05.0: BAR 15: assigned [mem 0x70000000-0x701fffff 64bit pref]
pci 0000:03:05.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:03:04.0: PCI bridge to [bus 04]
pci 0000:03:05.0: PCI bridge to [bus 05]
pci 0000:03:05.0: bridge window [io 0x1000-0x1fff]
pci 0000:03:05.0: bridge window [mem 0xfb300000-0xfb4fffff]
pci 0000:03:05.0: bridge window [mem 0x70000000-0x701fffff 64bit pref]
pci 0000:03:06.0: PCI bridge to [bus 06]
pci 0000:03:06.0: bridge window [mem 0xfb100000-0xfb2fffff]
pci 0000:02:00.0: PCI bridge to [bus 03-06]
pci 0000:02:00.0: bridge window [io 0x1000-0x1fff]
pci 0000:02:00.0: bridge window [mem 0xfb100000-0xfb4fffff]
pci 0000:02:00.0: bridge window [mem 0x70000000-0x701fffff 64bit pref]
pci 0000:00:02.0: PCI bridge to [bus 02-06]
pci 0000:00:02.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:02.0: bridge window [mem 0xfb100000-0xfb5fffff]
pci 0000:00:02.0: bridge window [mem 0x70000000-0x701fffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 07]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:03.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 08]
pci 0000:00:1c.2: PCI bridge to [bus 09]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xfb600000-0xfb6fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x1000-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x70000000-0xfbffbfff window]
pci_bus 0000:01: resource 1 [mem 0xfb700000-0xfb7fffff]
pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:02: resource 1 [mem 0xfb100000-0xfb5fffff]
pci_bus 0000:02: resource 2 [mem 0x70000000-0x701fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:03: resource 1 [mem 0xfb100000-0xfb4fffff]
pci_bus 0000:03: resource 2 [mem 0x70000000-0x701fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:05: resource 1 [mem 0xfb300000-0xfb4fffff]
pci_bus 0000:05: resource 2 [mem 0x70000000-0x701fffff 64bit pref]
pci_bus 0000:06: resource 1 [mem 0xfb100000-0xfb2fffff]
pci_bus 0000:07: resource 0 [io 0xe000-0xefff]
pci_bus 0000:07: resource 1 [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:07: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
pci_bus 0000:09: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:09: resource 1 [mem 0xfb600000-0xfb6fffff]
NET: Registered protocol family 2
TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 65536 (order: 9, 2097152 bytes)
UDP-Lite hash table entries: 65536 (order: 9, 2097152 bytes)
NET: Registered protocol family 1
PCI: CLS mismatch (64 != 32), using 64 bytes
pci 0000:07:00.0: Boot video device
Unpacking initramfs...
Freeing initrd memory: 30052k freed
DMAR: [Firmware Bug]: RMRR entry for device 01:00.0 is broken - applying workaround
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x56b69000-0x5ab69000] (64MB) mapped at [ffff880056b69000-ffff88005ab68fff]
Intel CQM monitoring enabled
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-16 Joules
sha1_ssse3: Using AVX2 optimized SHA-1 implementation
sha256_ssse3: Using AVX2 optimized SHA-256 implementation
futex hash table entries: 16384 (order: 8, 1048576 bytes)
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1498566082.430:1): initialized
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
tcache loaded
tswap loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
Key type big_key registered
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 25 for MSI/MSI-X
pcieport 0000:00:02.0: irq 27 for MSI/MSI-X
pcieport 0000:00:03.0: irq 29 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 30 for MSI/MSI-X
pcieport 0000:00:1c.2: irq 31 for MSI/MSI-X
pcieport 0000:02:00.0: irq 32 for MSI/MSI-X
pcieport 0000:03:04.0: irq 33 for MSI/MSI-X
pcieport 0000:03:05.0: irq 35 for MSI/MSI-X
pcieport 0000:03:06.0: irq 37 for MSI/MSI-X
aer 0000:00:01.0:pcie02: service driver aer loaded
aer 0000:00:02.0:pcie02: service driver aer loaded
aer 0000:00:03.0:pcie02: service driver aer loaded
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
pcieport 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:03:04.0: Signaling PME through PCIe PME interrupt
pcieport 0000:03:05.0: Signaling PME through PCIe PME interrupt
pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:03:06.0: Signaling PME through PCIe PME interrupt
pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
pci 0000:07:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
pci 0000:09:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
ioapic: probe of 0000:00:05.4 failed with error -22
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:03:05.0:pcie24: Slot #117 AttnBtn+ PwrCtrl+ MRL+ AttnInd+ PwrInd+ HotPlug+ Surprise- Interlock- NoCompl- LLActRep+
pciehp 0000:03:05.0:pcie24: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x2120
intel_idle: v0.4.1 model 0x3F
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
rdac: device handler registered
hp_sw: device handler registered
emc: device handler registered
alua: device handler registered
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb838000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.10.0-514.16.1.vz7.30.15 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb837000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.10.0-514.16.1.vz7.30.15 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.10.0-514.16.1.vz7.30.15 xhci-hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 15 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.10.0-514.16.1.vz7.30.15 xhci-hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
xhci_hcd 0000:01:00.0: xHCI Host Controller
xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:01:00.0: hcc params 0x0200eec1 hci version 0x110 quirks 0x00000010
xhci_hcd 0000:01:00.0: irq 38 for MSI/MSI-X
xhci_hcd 0000:01:00.0: irq 39 for MSI/MSI-X
xhci_hcd 0000:01:00.0: irq 40 for MSI/MSI-X
xhci_hcd 0000:01:00.0: irq 41 for MSI/MSI-X
xhci_hcd 0000:01:00.0: irq 42 for MSI/MSI-X
xhci_hcd 0000:01:00.0: irq 43 for MSI/MSI-X
xhci_hcd 0000:01:00.0: irq 44 for MSI/MSI-X
xhci_hcd 0000:01:00.0: irq 45 for MSI/MSI-X
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 3.10.0-514.16.1.vz7.30.15 xhci-hcd
usb usb5: SerialNumber: 0000:01:00.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:01:00.0: xHCI Host Controller
xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 6
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 3.10.0-514.16.1.vz7.30.15 xhci-hcd
usb usb6: SerialNumber: 0000:01:00.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
Intel P-state driver initializing.
cpuidle: using governor menu
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
NET: Registered protocol family 17
microcode: CPU0 sig=0x306f2, pf=0x1, revision=0x38
microcode: CPU1 sig=0x306f2, pf=0x1, revision=0x38
microcode: CPU2 sig=0x306f2, pf=0x1, revision=0x38
microcode: CPU3 sig=0x306f2, pf=0x1, revision=0x38
microcode: CPU4 sig=0x306f2, pf=0x1, revision=0x38
microcode: CPU5 sig=0x306f2, pf=0x1, revision=0x38
microcode: CPU6 sig=0x306f2, pf=0x1, revision=0x38
microcode: CPU7 sig=0x306f2, pf=0x1, revision=0x38
microcode: CPU8 sig=0x306f2, pf=0x1, revision=0x38
microcode: CPU9 sig=0x306f2, pf=0x1, revision=0x38
microcode: CPU10 sig=0x306f2, pf=0x1, revision=0x38
microcode: CPU11 sig=0x306f2, pf=0x1, revision=0x38
microcode: CPU12 sig=0x306f2, pf=0x1, revision=0x38
microcode: CPU13 sig=0x306f2, pf=0x1, revision=0x38
microcode: CPU14 sig=0x306f2, pf=0x1, revision=0x38
microcode: CPU15 sig=0x306f2, pf=0x1, revision=0x38
microcode: CPU16 sig=0x306f2, pf=0x1, revision=0x38
microcode: CPU17 sig=0x306f2, pf=0x1, revision=0x38
microcode: CPU18 sig=0x306f2, pf=0x1, revision=0x38
microcode: CPU19 sig=0x306f2, pf=0x1, revision=0x38
microcode: CPU20 sig=0x306f2, pf=0x1, revision=0x38
microcode: CPU21 sig=0x306f2, pf=0x1, revision=0x38
microcode: CPU22 sig=0x306f2, pf=0x1, revision=0x38
microcode: CPU23 sig=0x306f2, pf=0x1, revision=0x38
microcode: CPU24 sig=0x306f2, pf=0x1, revision=0x38
microcode: CPU25 sig=0x306f2, pf=0x1, revision=0x38
microcode: CPU26 sig=0x306f2, pf=0x1, revision=0x38
microcode: CPU27 sig=0x306f2, pf=0x1, revision=0x38
microcode: CPU28 sig=0x306f2, pf=0x1, revision=0x38
microcode: CPU29 sig=0x306f2, pf=0x1, revision=0x38
microcode: CPU30 sig=0x306f2, pf=0x1, revision=0x38
microcode: CPU31 sig=0x306f2, pf=0x1, revision=0x38
microcode: CPU32 sig=0x306f2, pf=0x1, revision=0x38
microcode: CPU33 sig=0x306f2, pf=0x1, revision=0x38
microcode: CPU34 sig=0x306f2, pf=0x1, revision=0x38
microcode: CPU35 sig=0x306f2, pf=0x1, revision=0x38
microcode: Microcode Update Driver: v2.01 , Peter Oruba
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Virtuozzo kernel - signing key for Kpatch modules: e2dc29b9f4b1a69d1ba2fbe3ef233ae72f4dee09'
Loaded X.509 cert 'Virtuozzo kernel signing key: cc0b5a8ebe71ecdedfd894ebfc758559d9fd1b26'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
rtc_cmos 00:00: setting system clock to 2017-06-27 12:21:23 UTC (1498566083)
Freeing unused kernel memory: 1712k freed
systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
systemd[1]: Reached target Swap.
systemd[1]: Starting Swap.
systemd[1]: Reached target Timers.
systemd[1]: Starting Timers.
systemd[1]: Created slice Root Slice.
systemd[1]: Starting Root Slice.
systemd[1]: Created slice System Slice.
systemd[1]: Starting System Slice.
systemd[1]: Reached target Slices.
systemd[1]: Starting Slices.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting dracut cmdline hook...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Journal Service...
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Reached target Sockets.
systemd[1]: Starting Sockets.
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Reached target Local File Systems.
systemd[1]: Starting Local File Systems.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Started Load Kernel Modules.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Started Setup Virtual Console.
systemd[1]: Started Journal Service.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
wmi: Mapper loaded
FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
usb 3-4: new high-speed USB device number 2 using xhci_hcd
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
libata version 3.00 loaded.
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
usb 1-1: New USB device found, idVendor=8087, idProduct=800a
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=8002
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 3-4: New USB device found, idVendor=2833, idProduct=2021
usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-4:1.0: USB hub found
hub 3-4:1.0: 4 ports detected
e1000e 0000:00:19.0 eth0: registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) d0:50:99:89:4b:89
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
ahci 0000:00:11.4: version 3.0
e1000e 0000:09:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:09:00.0: irq 47 for MSI/MSI-X
ahci 0000:00:11.4: irq 50 for MSI/MSI-X
ahci 0000:00:11.4: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xf impl SATA mode
ahci 0000:00:11.4: flags: 64bit ncq pm led clo pio slum part ems apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
ata1: SATA max UDMA/133 abar m2048@0xfb83d000 port 0xfb83d100 irq 50
ata2: SATA max UDMA/133 abar m2048@0xfb83d000 port 0xfb83d180 irq 50
ata3: SATA max UDMA/133 abar m2048@0xfb83d000 port 0xfb83d200 irq 50
ata4: SATA max UDMA/133 abar m2048@0xfb83d000 port 0xfb83d280 irq 50
ahci 0000:00:1f.2: irq 51 for MSI/MSI-X
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq stag led clo pio slum part ems sxs apst
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
scsi host8: ahci
scsi host9: ahci
ata5: SATA max UDMA/133 abar m2048@0xfb836000 port 0xfb836100 irq 51
ata6: SATA max UDMA/133 abar m2048@0xfb836000 port 0xfb836180 irq 51
ata7: SATA max UDMA/133 abar m2048@0xfb836000 port 0xfb836200 irq 51
ata8: SATA max UDMA/133 abar m2048@0xfb836000 port 0xfb836280 irq 51
ata9: SATA max UDMA/133 abar m2048@0xfb836000 port 0xfb836300 irq 51
ata10: SATA max UDMA/133 abar m2048@0xfb836000 port 0xfb836380 irq 51
usb 3-12: new high-speed USB device number 3 using xhci_hcd
e1000e 0000:09:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:1b:21:89:a7:c5
e1000e 0000:09:00.0 eth1: Intel(R) PRO/1000 Network Connection
e1000e 0000:09:00.0 eth1: MAC: 1, PHY: 4, PBA No: D50861-006
usb 3-12: New USB device found, idVendor=2833, idProduct=0201
usb 3-12: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-12: Product: Camera DK2
usb 3-12: Manufacturer: Oculus VR,Inc.
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4.00: ATA-8: INTEL SSDSC2BA200G3, 5DV10265, max UDMA/133
ata4.00: 390721968 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata1.00: ATA-8: INTEL SSDSC2BA200G3, 5DV10265, max UDMA/133
ata1.00: 390721968 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata3.00: ATA-8: INTEL SSDSC2BA200G3, 5DV10265, max UDMA/133
ata3.00: 390721968 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata2.00: ATA-8: INTEL SSDSC2BA200G3, 5DV10265, max UDMA/133
ata2.00: 390721968 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata4.00: configured for UDMA/133
ata3.00: configured for UDMA/133
ata1.00: configured for UDMA/133
ata2.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2BA20 0265 PQ: 0 ANSI: 5
scsi 1:0:0:0: Direct-Access ATA INTEL SSDSC2BA20 0265 PQ: 0 ANSI: 5
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata5.00: ATA-9: C300-CTFDDAC256MAG, 0007, max UDMA/100
ata5.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata5.00: configured for UDMA/100
ata1.00: Enabling discard_zeroes_data
sd 0:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata1.00: Enabling discard_zeroes_data
ata1.00: Enabling discard_zeroes_data
sd 0:0:0:0: [sda] Attached SCSI disk
ata2.00: Enabling discard_zeroes_data
sd 1:0:0:0: [sdb] 390721968 512-byte logical blocks: (200 GB/186 GiB)
scsi 2:0:0:0: Direct-Access ATA INTEL SSDSC2BA20 0265 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata2.00: Enabling discard_zeroes_data
ata2.00: Enabling discard_zeroes_data
sd 1:0:0:0: [sdb] Attached SCSI disk
usb 3-4.1: new full-speed USB device number 4 using xhci_hcd
ata3.00: Enabling discard_zeroes_data
sd 2:0:0:0: [sdc] 390721968 512-byte logical blocks: (200 GB/186 GiB)
scsi 3:0:0:0: Direct-Access ATA INTEL SSDSC2BA20 0265 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata3.00: Enabling discard_zeroes_data
ata3.00: Enabling discard_zeroes_data
sd 2:0:0:0: [sdc] Attached SCSI disk
tsc: Refined TSC clocksource calibration: 2395.657 MHz
Switched to clocksource tsc
ata4.00: Enabling discard_zeroes_data
sd 3:0:0:0: [sdd] 390721968 512-byte logical blocks: (200 GB/186 GiB)
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 4:0:0:0: Direct-Access ATA C300-CTFDDAC256M 0007 PQ: 0 ANSI: 5
ata4.00: Enabling discard_zeroes_data
ata4.00: Enabling discard_zeroes_data
sd 3:0:0:0: [sdd] Attached SCSI disk
sd 4:0:0:0: [sde] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 4:0:0:0: [sde] Write Protect is off
sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sde: sde1 sde2 sde3 sde4
sd 4:0:0:0: [sde] Attached SCSI disk
usb 3-4.1: New USB device found, idVendor=2833, idProduct=0021
usb 3-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-4.1: Product: Rift DK2
usb 3-4.1: Manufacturer: Oculus VR, Inc.
usb 3-4.1: SerialNumber: MSCE4807JHC43X00H100
hid-generic 0003:2833:0021.0001: hiddev0,hidraw0: USB HID v1.10 Device [Oculus VR, Inc. Rift DK2] on usb-0000:00:14.0-4.1/input0
usb 3-13: new full-speed USB device number 5 using xhci_hcd
ata6: SATA link down (SStatus 0 SControl 300)
usb 3-13: New USB device found, idVendor=0557, idProduct=8021
usb 3-13: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-13:1.0: USB hub found
hub 3-13:1.0: 4 ports detected
usb 3-14: new full-speed USB device number 6 using xhci_hcd
ata7: SATA link down (SStatus 0 SControl 300)
usb 3-13.1: new full-speed USB device number 7 using xhci_hcd
usb 3-14: New USB device found, idVendor=0a12, idProduct=0001
usb 3-14: New USB device strings: Mfr=0, Product=0, SerialNumber=0
ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata8.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata8.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata8.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata8.00: ATAPI: HL-DT-ST BD-RE BH16NS55, 1.01, max UDMA/133
ata8.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata8.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata8.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
usb 3-13.1: config 1 has an invalid interface number: 2 but max is 1
usb 3-13.1: config 1 has no interface number 1
ata8.00: configured for UDMA/133
scsi 7:0:0:0: CD-ROM HL-DT-ST BD-RE BH16NS55 1.01 PQ: 0 ANSI: 5
usb 3-13.1: New USB device found, idVendor=0557, idProduct=2213
usb 3-13.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-13.1: Product: KVM V1.3.123
usb 3-13.1: Manufacturer: ATEN Advance Tech Inc.
input: ATEN Advance Tech Inc. KVM V1.3.123 as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13.1/3-13.1:1.0/input/input2
hid-generic 0003:0557:2213.0002: input,hidraw1: USB HID v1.00 Keyboard [ATEN Advance Tech Inc. KVM V1.3.123] on usb-0000:00:14.0-13.1/input0
input: ATEN Advance Tech Inc. KVM V1.3.123 as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13.1/3-13.1:1.2/input/input3
hid-generic 0003:0557:2213.0003: input,hidraw2: USB HID v1.10 Mouse [ATEN Advance Tech Inc. KVM V1.3.123] on usb-0000:00:14.0-13.1/input2
ata9: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
sr 7:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 7:0:0:0: Attached scsi CD-ROM sr0
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
systemd-journald[275]: Received SIGTERM from PID 1 (systemd).
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: Inserted module 'ip_tables'
PrlSDKError('SDK error: 0x80000249: Unable to connect to Virtuozzo. You may experience a connection problem or the server may be down. Contact your Virtuozzo administrator for assistance.',)
EXT4-fs (dm-0): re-mounted. Opts: (null)
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
VZSTAT: initialized successfully
ploop_dev: module loaded
Bridge firewalling registered
systemd-journald[824]: Received request to flush runtime journal from PID 1
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
mei_me 0000:00:16.0: irq 52 for MSI/MSI-X
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: Attached scsi generic sg3 type 0
sd 4:0:0:0: Attached scsi generic sg4 type 0
sr 7:0:0:0: Attached scsi generic sg5 type 5
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[drm] Initialized drm 1.1.0 20060810
EDAC MC: Ver: 3.0.0
input: PC Speaker as /devices/platform/pcspkr/input/input4
Linux video capture interface: v2.00
EDAC sbridge: Seeking for: PCI ID 8086:2fa0
EDAC sbridge: Seeking for: PCI ID 8086:2fa0
EDAC sbridge: Seeking for: PCI ID 8086:2ffc
EDAC sbridge: Seeking for: PCI ID 8086:2ffc
EDAC sbridge: Seeking for: PCI ID 8086:2ffd
EDAC sbridge: Seeking for: PCI ID 8086:2ffd
EDAC sbridge: Seeking for: PCI ID 8086:2f60
EDAC sbridge: Seeking for: PCI ID 8086:2f60
EDAC sbridge: Seeking for: PCI ID 8086:2fa8
EDAC sbridge: Seeking for: PCI ID 8086:2fa8
EDAC sbridge: Seeking for: PCI ID 8086:2f71
EDAC sbridge: Seeking for: PCI ID 8086:2f71
EDAC sbridge: Seeking for: PCI ID 8086:2faa
EDAC sbridge: Seeking for: PCI ID 8086:2faa
EDAC sbridge: Seeking for: PCI ID 8086:2fab
EDAC sbridge: Seeking for: PCI ID 8086:2fab
EDAC sbridge: Seeking for: PCI ID 8086:2fac
EDAC sbridge: Seeking for: PCI ID 8086:2fad
EDAC sbridge: Seeking for: PCI ID 8086:2fbd
EDAC sbridge: Seeking for: PCI ID 8086:2fbd
EDAC sbridge: Seeking for: PCI ID 8086:2fbf
EDAC sbridge: Seeking for: PCI ID 8086:2fbf
EDAC sbridge: Seeking for: PCI ID 8086:2fb9
EDAC sbridge: Seeking for: PCI ID 8086:2fb9
EDAC sbridge: Seeking for: PCI ID 8086:2fbb
EDAC sbridge: Seeking for: PCI ID 8086:2fbb
EDAC sbridge: Seeking for: PCI ID 8086:2f68
EDAC sbridge: Seeking for: PCI ID 8086:2f68
EDAC sbridge: Seeking for: PCI ID 8086:2f79
EDAC sbridge: Seeking for: PCI ID 8086:2f79
EDAC sbridge: Seeking for: PCI ID 8086:2f6a
EDAC sbridge: Seeking for: PCI ID 8086:2f6a
EDAC sbridge: Seeking for: PCI ID 8086:2f6b
EDAC sbridge: Seeking for: PCI ID 8086:2f6b
EDAC sbridge: Seeking for: PCI ID 8086:2f6c
EDAC sbridge: Seeking for: PCI ID 8086:2f6d
EDAC MC0: Giving out device to 'sbridge_edac.c' 'Haswell Socket#0': DEV 0000:ff:12.0
EDAC sbridge: Ver: 1.1.1
Bluetooth: Core ver 2.21
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
snd_hda_intel 0000:00:1b.0: irq 53 for MSI/MSI-X
snd_hda_intel 0000:07:00.1: Disabling MSI
snd_hda_intel 0000:07:00.1: Handle vga_switcheroo audio client
uvcvideo: Found UVC 1.00 device Camera DK2 (2833:0201)
usbcore: registered new interface driver btusb
uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
input: Camera DK2 as /devices/pci0000:00/0000:00:14.0/usb3/3-12/3-12:1.0/input/input5
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
snd_hda_codec_realtek hdaudioC0D0: ALC1150: SKU not ready 0x00000000
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1150: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
nvidia: loading out-of-tree module taints kernel.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
iTCO_vendor_support: vendor-support=0
vgaarb: device changed decodes: PCI:0000:07:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
nvidia-nvlink: Nvlink Core is being initialized, major device number 243
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 375.26 Thu Dec 8 18:36:43 PST 2016 (using threaded interrupts)
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
AES CTR mode by8 optimization enabled
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 375.26 Thu Dec 8 18:04:14 PST 2016
[drm] [nvidia-drm] [GPU ID 0x00000700] Loading driver
alg: No test for crc32 (crc32-pclmul)
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain dram
intel_rapl: DRAM domain energy unit 15300pj
Adding 33554428k swap on /dev/sde3. Priority:-1 extents:1 across:33554428k SSFS
EXT4-fs (sde2): mounted filesystem with ordered data mode. Opts: (null)
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:07:00.1/sound/card1/input13
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:07:00.1/sound/card1/input14
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:07:00.1/sound/card1/input15
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:07:00.1/sound/card1/input16
EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: lazytime
type=1305 audit(1498566089.871:2): audit_pid=1403 old=0 auid=4294967295 ses=4294967295 res=1
Ebtables v2.0 registered
Enabling conntracks and NAT for ve0
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp9s0: link is not ready
e1000e 0000:09:00.0: irq 47 for MSI/MSI-X
e1000e 0000:09:00.0: irq 47 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): enp9s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp9s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): br1: link is not ready
device enp0s25 entered promiscuous mode
e1000e: enp9s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): enp9s0: link becomes ready
e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
br0: port 1(enp0s25) entered forwarding state
br0: port 1(enp0s25) entered forwarding state
br0: port 1(enp0s25) entered forwarding state
nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 242
nvidia 0000:07:00.0: irq 55 for MSI/MSI-X
8021q: 802.1Q VLAN Support v1.8
8021q: adding VLAN 0 to HW filter on device enp9s0
ip6_tables: (C) 2000-2006 Netfilter Core Team
pmd_set_huge: Cannot satisfy [mem 0xf0000000-0xf0200000] with a huge-page mapping due to MTRR override.
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
device virbr0-nic entered promiscuous mode
virbr0: port 1(virbr0-nic) entered forwarding state
virbr0: port 1(virbr0-nic) entered forwarding state
Netfilter messages via NETLINK v0.30.
ctnetlink v0.93: registering with nfnetlink.
IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
virbr0: port 1(virbr0-nic) entered disabled state
ploop56249: p1
ploop56249: p1
ploop46706: p1
ploop46706: p1
EXT4-fs (ploop56249p1): mounted filesystem with ordered data mode. Opts: ,pfcache_csum
EXT4-fs (ploop56249p1): loaded balloon from 12 (0 blocks)
EXT4-fs (ploop56249p1): re-mounted. Opts: ,pfcache_csum,balloon_ino=12
ploop57450: p1
ploop57450: p1
EXT4-fs (ploop46706p1): mounted filesystem with ordered data mode. Opts: ,pfcache_csum
EXT4-fs (ploop46706p1): loaded balloon from 12 (0 blocks)
EXT4-fs (ploop46706p1): re-mounted. Opts: ,pfcache_csum,balloon_ino=12
EXT4-fs (ploop57450p1): mounted filesystem with ordered data mode. Opts: ,pfcache_csum
EXT4-fs (ploop57450p1): loaded balloon from 12 (0 blocks)
EXT4-fs (ploop57450p1): re-mounted. Opts: ,pfcache_csum,balloon_ino=12
Bits 55-60 of /proc/PID/pagemap entries are about to stop being page-shift some time soon. See the linux/Documentation/vm/pagemap.txt for details.
cgroup: new mount options do not match the existing superblock, will be ignored
cgroup: new mount options do not match the existing superblock, will be ignored
CT: cff89db6-e98a-40f4-9b8b-2586972a6fbe: started
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
iptables resources are charged from different UB (0 -> cff89db6-e98a-40f4-9b8b-2586972a6fbe)
iptables resources are charged from different UB (0 -> cff89db6-e98a-40f4-9b8b-2586972a6fbe)
iptables resources are charged from different UB (0 -> cff89db6-e98a-40f4-9b8b-2586972a6fbe)
iptables resources are charged from different UB (0 -> cff89db6-e98a-40f4-9b8b-2586972a6fbe)
CT: 999b20aa-32f5-4536-b12a-4636930d3bd4: started
iptables resources are charged from different UB (0 -> cff89db6-e98a-40f4-9b8b-2586972a6fbe)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
iptables resources are charged from different UB (0 -> cff89db6-e98a-40f4-9b8b-2586972a6fbe)
iptables resources are charged from different UB (0 -> cff89db6-e98a-40f4-9b8b-2586972a6fbe)
iptables resources are charged from different UB (0 -> cff89db6-e98a-40f4-9b8b-2586972a6fbe)
iptables resources are charged from different UB (0 -> 999b20aa-32f5-4536-b12a-4636930d3bd4)
iptables resources are charged from different UB (0 -> 999b20aa-32f5-4536-b12a-4636930d3bd4)
iptables resources are charged from different UB (0 -> 999b20aa-32f5-4536-b12a-4636930d3bd4)
iptables resources are charged from different UB (0 -> 999b20aa-32f5-4536-b12a-4636930d3bd4)
iptables resources are charged from different UB (0 -> 999b20aa-32f5-4536-b12a-4636930d3bd4)
iptables resources are charged from different UB (0 -> 999b20aa-32f5-4536-b12a-4636930d3bd4)
iptables resources are charged from different UB (0 -> 999b20aa-32f5-4536-b12a-4636930d3bd4)
iptables resources are charged from different UB (0 -> 999b20aa-32f5-4536-b12a-4636930d3bd4)
CT: 999b20aa-32f5-4536-b12a-4636930d3bd4: stopped
cgroup: new mount options do not match the existing superblock, will be ignored
CT: a1176015-6cca-4019-92d3-67b51b53f376: started
iptables resources are charged from different UB (0 -> a1176015-6cca-4019-92d3-67b51b53f376)
iptables resources are charged from different UB (0 -> a1176015-6cca-4019-92d3-67b51b53f376)
iptables resources are charged from different UB (0 -> a1176015-6cca-4019-92d3-67b51b53f376)
iptables resources are charged from different UB (0 -> a1176015-6cca-4019-92d3-67b51b53f376)
iptables resources are charged from different UB (0 -> a1176015-6cca-4019-92d3-67b51b53f376)
iptables resources are charged from different UB (0 -> a1176015-6cca-4019-92d3-67b51b53f376)
iptables resources are charged from different UB (0 -> a1176015-6cca-4019-92d3-67b51b53f376)
iptables resources are charged from different UB (0 -> a1176015-6cca-4019-92d3-67b51b53f376)
iptables resources are charged from different UB (cff89db6-e98a-40f4-9b8b-2586972a6fbe -> 0)
iptables resources are charged from different UB (cff89db6-e98a-40f4-9b8b-2586972a6fbe -> 0)
iptables resources are charged from different UB (a1176015-6cca-4019-92d3-67b51b53f376 -> 0)
iptables resources are charged from different UB (a1176015-6cca-4019-92d3-67b51b53f376 -> 0)
nvidia-modeset: Allocated GPU:0 (GPU-2dea7f1a-db03-38de-c247-ade4f5af887f) @ PCI:0000:07:00.0
fuse init (API version 7.22)
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
TCP: lp registered
perf: interrupt took too long (2502 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
perf: interrupt took too long (3157 > 3127), lowering kernel.perf_event_max_sample_rate to 63000
INFO: NMI handler (perf_event_nmi_handler) took too long to run: 434741.002 msecs
perf: interrupt took too long (22503 > 3946), lowering kernel.perf_event_max_sample_rate to 8000